Wirelessly connect your iPhone to an Arduino ATMega2560 to update the information and controls of a RS-UV3 Radio Shield using the Adafruit BLE Bluethooth adapters.
Features:
1) Set Rx Freq – Set the receiving frequency of the selected RS-UV3
2) Set Tx Freq – Set the transmitting frequency of the selected RS-UV3
3) Set Sqlch Level – Set the squelch level of the selected RS-UV3
4) Tone Sqlch Mode – Set the Tone Squelch Mode of the selected RS-UV3
5) Set CTCSS – Sets the CTCSS tone frequency
6) Repeater ON/OFF – Turns the power on or off of the connected RS-UV3 units *
7) BEEP ON/OFF – Turns the audio acknowledgement of a key press On or Off *
8) Fan ON/OFF – Turns the cooling fan On or Off *
9) Set Clock – Sets the time of the clock **
10) Set Volume – Sets the volume of the selected RS-UV3
11) Display System Info
12) Reset RS-UV3 ***
13) Set Call Sign – Keypad performs like a telephone keypad i.e. ‘2’ = A B C 2 - On iPhone a keyboard pops up for an inout field.
14) Transmit Call Sign
15) Set Hang Timer
16) Set ID Timer
17) Set Time Out Timer
18) Toggle Transmitter
19) Toggle DTFM Detect
20) Set Code Speed